اقتباس:
المشاركة الأصلية كتبت بواسطة kholoud9
السلام ..
عفوا بس انا تعريف عن طريق الشبكه " لاسلكيه" والطابعه ما تشتغل عشان اعيد التعريف :/ ..
انا عدت تشغيل الطابعه وطلع بشاشة الطابعه " 49.4C02 error to continue" !!!
|
Re: I recieve error code 49.4C02 from my HP3005N printer.
The 49.xxxx errors are "communication errors" and can be caused by many things:
Corrupted driver, corrupted firmware, corrupted print job, bad nic card (your printer has a built in network port), bad memory DIMM, bad formatter board etc etc.
Unplug the network cable, power off and then back on..........print a configuration page...........check that the printer sees the network port (if you see the IP address on the EIO page it sees it)...........if it doesn't see it you may have a bad formatter board (the network port is built in it).
If the printer works just fine while unplugged from the network, start replacing the network cable, otherwise you need to look into your network.